Industrial Autoclave

The Industrial Autoclave is an LuV tier multiblock for sterilizing and transforming materials with superheated liquids and high pressure. The Industrial Autoclave is a direct upgrade from the singleblock autoclave because gains +25% speed per heating coil tier, -8.33% EU/t per pipe casing tier, and 12 parallels per item pipe casing tier. Input separation should be enabled on the Industrial Autoclave for using different programmed circuits within the same machine.

Construction

The Industrial Autoclave has three tiered components. The heating coils determine the speed bonus, the pipe casings determine the power discount, and the item pipe casings determine the total number of parallels. The glass can be any tier and has no effect on the operation of the machine. Buses/hatches may replace any containment casing anywhere on the structure. Multi-amp and laser energy hatches are not supported, but there can multiple regular energy hatches for overclocking. Use the Multiblock Structure Hologram Projector to visualize/build the structure with subchannels "glass", "pipe", "item_pipe", and "coil" to specify the tier of each of those components.

Structure

Controller: Front bottom center
128-148 Pressure Containment Casing
42 PTFE Frame Box
42 Any Tiered Glass
14 Pipe Casing (Tiered)
7 Item Pipe Casing (Tiered)
7 Heating Coil (Tiered)
1+ Energy Hatch: Any containment casing
1 Maintenance Hatch: Any containment casing
1+ Input Bus/Hatch: Any containment casing
1+ Output Bus/Hatch: Any containment casing

Wallsharing

Industrial Autoclaves may wallshare each of their sides to save on casings, heating coils, and buses/hatches. No recipe uses more than 1A of power so it is possible to share one energy hatch between two machines.

Usage

The Industrial Autoclave is a direct upgrade from the singleblock autoclave because gains +25% speed per heating coil tier, -8.33% EU/t per pipe casing tier, and 12 parallels per item pipe casing tier, as seen in the following tables.

Tier	Heating Coil	Speed
1	Cupronickel	25%
2	Kanthal	50%
3	Nichrome	75%
4	TPV-Alloy	100%
5	HSS-G	125%
6	HSS-S	150%
7	Naquadah	175%
8	Naquadah Alloy	200%
9	Trinium	225%
10	Electrum Flux	250%
11	Awakened Draconium	275%
12	Infinity	300%
13	Hypogen	325%
14	Eternal	350%

Tier	Item Pipe Casing	Parallels
1	Tin	12
2	Brass	24
3	Electrum	36
4	Platinum	48
5	Osmium	60
6	Quantium	72
7	Fluxed Electrum	84
8	Black Plutonium	96

Tier	Pipe Casing	EU/t
1	Bronze	91.67%
2	Steel	83.33%
3	Titanium	75.00%
4	Tungstensteel	66.67%

Input separation should be enabled on the Industrial Autoclave to prevent SOLID ingredients in different input buses from being used in the same recipe, including any programmed circuits. That means a single Industrial Autoclave with many input buses can support many different programmed circuits simultaneously. Just don't forget to stay above the minimum number of containment casings. FLUID ingredients are always shared regardless of input separation, unless the input hatch is colored.