Large Fluid Extractor

The Large Fluid Extractor (LFE) is an EV tier multiblock for heating solid metals into fluids. The LFE is a direct upgrade from the singleblock fluid extractor because it runs at 150% speed, only uses 80% of the EU/t normally required, and offers 8 parallels per solenoid tier. The heating coils also provide a 10% speed bonus (additive) and 10% EU discount per tier (multiplicative).

The LFE has three tiered components. The glass determines the maximum tier of the energy hatch. The heating coils determine the speed bonus and EU discount. The solenoid coils determine the number of parallels. Multi-amp and laser energy hatches are not supported, but there can be multiple regular energy hatches for overclocking. Use the Multiblock Structure Hologram Projector to visualize/build the structure with subchannels "glass", "coil" and "solenoid" to specify the tier of each of those components.

Structure

• Controller: Front bottom center
• 41-53 Robust Tungstensteel Machine Casing
• 36 Any Tiered Glass (Tiered)
• 24 Heating Coil (Tiered)
• 24 Black Steel Frame Box
• 7 Solenoid Superconductor Coil (Tiered)
• 1+ Energy Hatch: Any casing
• 1 Maintenance Hatch: Any casing
• 1+ Input Bus: Any casing
• 0+ Output Bus: Any casing
• 1+ Output Hatch: Any casing

Wallsharing

LFEs may wallshare each of their sides to save on casings, frame boxes, glass, and buses/hatches. However, that does not include the solenoid superconductor coils. No recipe uses more than 1A of power so it is possible to share one energy hatch between two machines.

The LFE is a direct upgrade from the singleblock fluid extractor because it runs at 150% speed, only uses 80% of the EU/t normally required, and offers 8 parallels per solenoid tier, as seen in the following table.

The heating coils also provide an additional 10% speed bonus (additive) and 10% EU/t discount per tier (multiplicative). Together, that significantly reduces the total EU cost of recipes, as seen in the following table.