Industrial Sledgehammer

The Industrial Sledgehammer is an IV tier multiblock for forging metals on an anvil. The Industrial Sledgehammer is a direct upgrade from the singleblock forge hammer and the Steam Presser because it runs at 200% speed and offers ${\displaystyle {\displaystyle {\text{Voltage Tier}}\times {\text{Solenoid Tier}}\times 6}}$ parallels (max 1,080).

The Industrial Sledgehammer has one tiered component. The solenoid coils determine the total number of parallels. Buses/hatches may replace any forge casing anywhere on the structure. Multi-amp and laser energy hatches are not supported, but there can be multiple regular energy hatches for overclocking. Use the Multiblock Structure Hologram Projector to visualize/build the structure with subchannel "solenoid" to specify the tier of the solenoid coils.

Structure

• Controller: Front center, 2nd layer
• 10-29 Forge Casing
• 20 Rebolted Black Steel Casing
• 3 Solenoid Superconductor Coil (Tiered)
• 2 Refined Graphite Block
• 1+ Energy Hatch: Any casing
• 1 Maintenance Hatch: Any casing
• 1 Muffler Hatch: Any casing
• 1+ Input Bus: Any casing
• 0+ Input Hatch: Any casing
• 1+ Output Bus: Any casing
• 0+ Output Hatch: Any casing

Wallsharing

Industrial Sledgehammers may wallshare each of their sides to save on casings and buses/hatches. No recipe uses more than 1A of power so it is possible to share one energy hatch between two machines.

The Industrial Sledgehammer is a direct upgrade from the singleblock forge hammer and the Steam Presser because it runs at 200% speed and offers ${\displaystyle {\displaystyle {\text{Voltage Tier}}\times {\text{Solenoid Tier}}\times 6}}$ parallels, as seen in the following table.