Amazon Warehousing Depot

The Amazon Warehousing Depot (AWD) is an IV tier multiblock for packaging and unpackaging various items. The AWD is a direct upgrade from the singleblock packager and unpackager because it can process both types of recipes, runs up to 900% speed, only uses 75% of the EU/t normally required, and offers 16 parallels per voltage tier. Input separation should be enabled on the AWD for using different schematics within the same machine.

The AWD has one tiered component. The item pipe casings determine the speed bonus of the machine. The glass can be any tier and has no effect on the operation of the machine. Buses/hatches may replace any casing anywhere on the structure. Multi-amp and laser energy hatches are not supported, but there can be multiple regular energy hatches for overclocking. Use the Multiblock Structure Hologram Projector to visualize/build the structure with subchannels "item_pipe" and "glass" to specify the tier of those components.

Structure

• Controller: Front right, 2nd layer
• 4-15 Supply Depot Casing
• 3 Item Pipe Casing (Tiered)
• 3 Any Tiered Glass
• 2 Iron Frame Box
• 1+ Energy Hatch: Any casing
• 1 Maintenance Hatch: Any casing
• 1 Muffler Hatch: Any casing
• 1+ Input Bus: Any casing
• 1+ Output Bus: Any casing

Wallsharing

AWDs may wallshare each of their sides except for the right side (controller is in the way) to save on casings, frame boxes, and buses/hatches. No recipe uses more than 1A of power so it is possible to share one energy hatch between two machines.

The AWD is a direct upgrade from the singleblock packager and unpackager because it can process both types of recipes, runs up to 900% speed, only uses 75% of the EU/t normally required, and offers 16 parallels per voltage tier, as seen in the following tables.

The AWD has two operating modes, listed below. Switch between modes in the GUI of the controller or by right-clicking the controller with a screwdriver. The packager mode is useful for the tiny and small piles of dust from the Electric Implosion Compressor and for creating scrap boxes. The unpackager mode is a nice-to-have for recycling certain items such as old Lapotronic Supercapacitor capacitors.

• Packager - Runs ONLY packager recipes.
• Unpackager - Runs ONLY unpackager recipes.

Input separation should be enabled on the AWD to prevent SOLID ingredients in different input buses from being used in the same recipe, including any schematics. That means a single AWD with many input buses can support many different schematics simultaneously. Just don't forget to stay above the minimum number of supply depot casings.

• The multiblock is named after Amazon, an American tech conglomerate most well known for its e-commerce platform.